Chip 2004 April

home *** CD-ROM | disk | FTP | other *** search

/ Chip 2004 April / CMCD0404.ISO / Software / Demo / ReelDVD 3.1.1 Trial Install / data1.cab / PFC_dlls / Pfc1033.dll / string.txt next >

Wrap

Text File | 2003-07-16 | 27KB | 766 lines

16384 %s 16385 pfc.inf 16386 pfcddb.dat 16387 pfcsrvc.exe 16400 Default 16401 English 16402 Japanese 16403 German 16404 Spanish 16405 Italian 16406 French 16407 Chinese (traditional) 16408 Chinese (simplified) 16424 Information 16425 Warning 16426 Application error 16427 System error 16428 Status 16429 Unknown event/error 16430 Unknown string message 16432 CD-DA 16433 CD-ROM 16434 CD-XA 16435 CD-I 16436 Open 16437 Blank 16438 Gap 16439 Audio 16440 Mode1 16441 Mode2 16442 [%02lu] 16443 [%02lu/%02lu] 16444 %s, %lu session(s), %lu track(s) 16445 %s session 16446 %s track 16447 %s index 16448 %02lu:%02lu:%02lu 16449 %02lu:%02lu:%02lu 16450 %02lu:%02lu:%02lu MSF (%ld LBA) 16451 %02lu:%02lu:%02lu MSF (%lu blocks, ~%lu KB) 16452 DVD 16453 %s, %lu border(s), %lu zone(s) 16454 %s border 16455 %s zone 16456 %lu 16457 %lu 16458 %lu blocks 16459 %lu blocks (%s) 16464 KB 16465 MB 16466 GB 16468 Track codec module 16469 Track analyzer module 16472 Unable to instantiate analyzer module (code %ld) 16473 Error analyzing MP3 file (code %ld) 16474 Unable to instantiate codec module (code %ld) 16475 Error connecting file input interface (code %ld) 16476 Error seeking to new file position (code %ld) 16477 Error reading MP3 file (code %ld) 16478 Invalid MP3 frame encountered 16479 '%s' already exist 16480 Error configuring MP3 compression engine 16481 MP3 codec expired or unregistered: please register or upgrade to full version to re-enable MP3 encoding 16492 Unable to create map file 16493 Unable to create memory map view of file 16494 File system interface 16502 Error analysing WMA file 16503 Error configuring WMA reader 16504 Error configuring WMA compression engine 16505 Error configuring WMA compression profile 16506 Error configuring WMA advanced reader 16507 Error setting WMA advanced timer 16508 Error starting WMA file reading 16509 Unable to create WMA writer 16560 Memory codec module 16561 Codec not available 16562 Unable to initialize codec 16563 Error decoding compressed audio 16564 Error encoding compressed audio 16565 Error decoding compressed data 16566 Error encoding compressed data 16688 Premastering engine 16689 Standard file system interface 16690 Initializing premastering engine... 16720 Unable to open CD image 16721 Read operation failed 16722 Illegal volume descriptor sequence 16723 Unable to match ISO file-system with Joliet file-system 16724 Unable to find Macintosh data in directory record 16725 Unable to determine image base address 16788 Sector too small or block offset < 8 in case of XA 16789 Too many directory records 16790 Some ISO directory record name is empty 16791 Some ISO directory record full name is empty 16792 Two or more fixed-location structures are incompatible because they overlap 16793 Some structure (either fixed or not) is located over the maximum block location allowed 16794 Some fixed-location structure is located below the lowest block location allowed 16795 A boot validation entry is present but a boot default entry is not 16796 Some boot section exists with no boot entries 16797 Could not complete writing 16798 Asynchronous streaming operation error 16799 User database returned an object different than expected 16800 Pre-mastering process in progress 16801 Requested functionality is not included in this edition 16944 Device manager 16945 Device manager initialization failed 16946 The %s unit is still in use 16947 The %s unit is not a reader 16948 The %s unit is not a writer 16949 The %s and %s units are not compatible 16950 V%s 16951 Unable to reserve the minimum number of units requested 16952 Timeout accessing device 16953 Reached maximum number of processes 16954 Forcing TAO recording 16955 Retrieving CDDB info... 16956 Error retrieving CDDB info 16957 CDDB info not available 16976 (%sBus %lu,ID %lu) 16977 (Com %lu) 16978 PFC device 16979 Destination cluster 17005 Drive terminated to preserve writing process 17006 Padus PFC Version %s 17007 Invalid track attempting to retrieve file system 17010 SRB aborted 17011 Unable to abort SRB 17012 SRB completed with error 17030 Timout: resending SCSI command 17136 Invalid ASPI command 17137 Invalid host adapter number 17138 Device not installed 17232 Invalid parameter set in SRB 17233 User buffer alignment problem 17234 Illegal mode 17235 Unable to detect an ASPI manager 17236 Unable to initialize the ASPI manager 17237 No resources available to execute command 17238 User buffer size to big to handle 17239 The DLLs/EXEs of ASPI don't version check 17240 No host adapters to manage 17241 Couldn't allocate resources needed to initialize the ASPI shell 17264 (%s) %s 17265 Invalid SCSI/ATAPI return sense 17266 Invalid SCSI/ATAPI abort sequence 17267 Unable to allocate enough memory for the async SCSI/ATAPI queue 17268 Device data buffer too big 17269 Internal SCSI/ATAPI error 17270 Skip this command 17271 No active unit in the cluster 17337 Timed out while SRB was waiting to beprocessed 17339 While processing the SRB, the adapter timed out 17341 While processing SRB, the adapter received a MESSAGE REJECT 17342 A bus reset was detected 17343 A parity error was detected 17344 The adapter failed in issuing REQUEST SENSE 17345 Selection Timeout 17346 Data overrun data underrun 17347 Unexpected bus free 17348 Target bus phase sequence failure 17394 Check condition 17396 Condition met 17400 Busy 17408 Intermediate 17412 Intermediate-condition met 17416 Reservation conflict 17426 Command terminated 17432 Queue full 17436 Illegal IOCTL 17457 Recovered error 17458 Not ready 17459 Medium error 17460 Hardware error 17461 Illegal request 17462 Unit attention 17463 Data protect 17464 Blank check 17465 Vendor specific 17466 Copy abort 17467 Abort 17468 Equal (search) 17469 Volume overflow 17470 Miscompare (search) 17471 Reserved 17520 Not ready (medium not loaded) 17521 Unable to open/create '%s' CD image 17522 Unable to seek track %lu in the '%s' CD image 17523 '%s' CD image not found 17524 '%s' is not a valid CD image 17525 '%s' CD image is read only 17526 Error accessing '%s' CD image 17527 Unable to load/store '%s' CD table of content (TOC) 17528 Unable to detect '%s' CD format: using user provided format instead 17529 Error detecting '%s' CD format 17530 Verify failed at sector %lu 17531 Media are incompatible 17532 '%s' audio not in CD compatible format (44.1 KHz, 16 bit, stereo) 17584 Forcing pseudo-write mode 17585 Forcing lowest available recording speed: please register or upgrade to full version to enable high speed recording 17586 Verify failed at sector %lu 17587 Media are incompatible 17588 Imperfect audio resynchronization at address %02lu:%02lu:%02lu MSF 17589 CD cache corrupted 17590 Unable to allocate redundant read buffers 17591 Redundant audio resynchronization failed 17592 Not a readable disc 17593 Destination unit(s) not ready. 17594 Please insert media in every selected unit. 17595 Please eject media in every selected unit. 17596 Supplying %lu dummy block(s) at address %02lu:%02lu:%02lu MSF 17597 ECC/EDC inconsistency at address %02lu:%02lu:%02lu MSF 17598 Read speed set to %luX 17599 Error setting read speed to %luX 17600 Error reading CD TEXT info 17601 One or more units did not certified the disc for recording at selected speed. Continue writing? 17602 Using lower density SAO/DAO (force all media to max. 63 min.) 17603 DVD option not available: restricting max. disc size to %lu blocks 17777 Recovery failed 17778 No seek complete 17779 Medium not mounted or write fault 17780 Drive not ready 17781 Drive does not respond to SELECTION 17782 No reference position found or PCA almost full 17783 Multiple peripheral devices selected 17784 Drive communication failure 17785 Tracking, focus or spindle servo failure 17786 Error log overflow 17787 Warning, temperature exceeded or enclosure degraded 17788 Buffer under-run or write error 17792 Invalid block/packet size, buffer under-run or disc is or is not empty 17793 L-EC or CIRC unrecovered read error 17794 Mode zero error or error reading UPC/ISRC 17796 Block not found 17797 Random or mechanical positioning error 17799 Recovered data with retries 17800 Recovered data with L-EC or CIRC and retries 17802 Parameter list length error 17803 Synchronous data transfer error 17805 Miscompare during verify operation 17808 Invalid command operation code 17809 Invalid block address 17810 Illegal function for device type 17812 Illegal field in command descriptor block 17813 Invalid LUN 17814 Illegal field in parameter list 17815 Write protected 17816 Not ready to ready change, medium may have changed 17817 Power-on reset or bus reset occurred 17818 Parameters changed or padding blocks added 17819 Copy cannot execute since host cannot disconnect 17820 Command sequence error or program area is or is not empty 17822 Insufficient time for operation 17823 Command cleared by another initiator 17824 Medium format incompatible or unknown, cannot read or write 17825 Medium format corrupted 17826 Write data error with CU 17827 Monitor ATIP error 17828 Absorption control error, enclosure failure 17829 Enclosure service failure 17831 Rounded parameter 17833 Saving parameters not supported 17834 Medium not present 17835 Medium or magazine status 17836 Mechanical positioning or changer error 17837 Invalid bits in identify message 17838 Unit has not self-configured yet 17839 Operating conditions have changed 17840 Diagnostic failure 17842 Power-on or self test failure 17843 Message error 17844 Internal controller error 17845 Select/Reselect failure 17846 Unsuccessful soft reset 17847 SCSI parity error 17848 Initiator detected error message received 17849 Invalid message error, power-on or self test failure 17850 Command phase error or RAM failure 17851 Data phase error or internal time-out 17852 Unit failed self-configuration 17853 Tagged overlapped commands 17854 Overlapped command attempted 17856 Write append error or operation in progress 17857 Erase failure 17859 Medium load, eject or removal failed or prevented 17861 System resource failure 17863 Unable to read TOC, PMA or subcode 17866 Operator request or state change input 17867 Log exception 17869 Failure prediction threshold exceeded 17870 Low power, idle or standby condition on 17875 End of user area encountered on this track 17876 Illegal mode for this track or invalid packet size 17877 Verify failed or voltage fault 17887 Copy protection error 17889 Session fixation error 17890 Session fixation error 17891 OPC or PMA update error 17903 Invalid subcode 17904 Controller PROM error 17905 Illegal track 17906 Command currently not valid 17907 Medium removal is prevented or unable to spin-up 17908 Tray is out or address exceeded the last valid block address 17909 Track at once not in PMA, invalid audio address or sync. error 17910 Unable to find address or no data track 17911 Mistracking 17912 Illegal lead-out 17913 Inappropriate command 17914 Subcode error 17915 Disc could not be ejected 17916 Disc ejected by eject switch 17917 Unable to play audio 17918 Error reading TOC 17919 A blank disc is detected by read TOC 17920 Reserve track check, verify blank error, PMA less disc or invalid disc 17921 Invalid last track mode or communication error 17922 Header search or drive mechanism error 17923 Disc mount error 17924 TOC less disc 17925 Disc information less disc 17926 Disc information read error 17927 Linear velocity mesurement error 17928 Header monitor, EDC, block size or drive sequence error 17929 Actuator velocity control error 17930 Slider velocity control error 17931 Optimum power calibration initialization error 17932 Optimum power calibration execution error 17935 Internal communication error 17936 Stopped on non-data block 17937 Invalid start address 17938 Attempt to cross track boundary 17939 Illegal medium 17940 Disc write protected 17941 Application code conflict 17942 Illegal block size for command 17943 Block size conflict 17944 Illegal transfer length 17945 Request for fixation failed 17946 End of medium reached 17947 Illegal track number 17948 Data track length error 17949 Buffer under-run 17950 Illegal track mode 17951 Optimum power calibration error 17952 Calibration area almost full 17953 Current program area empty 17954 No EFM at search address 17955 Link area encountered 17956 Calibration area full 17957 Dummy blocks added 17958 Block size format conflict or media load mechanism failed 17959 Current command aborted 17960 Program area not empty or long write in progress 17961 Parameter list too large or audio play not in progress 17962 Write audio on reserved track 17967 Loss of streaming 17968 No barcode available 17969 Barcode reading error or invalid track number/status 17970 Controller codec error 17971 Unit self-test failed 17972 Buffer parity error or illegal reserve length 17973 Data transfer error 17974 Unwritten area, link blocks or nonexistent block encountered 17977 Illegal block length 17978 Power calibration error 17980 Not enough space 17981 No track present to complete 17982 Unrecordable track descriptor encountered 17984 Recovery needed or PMA error 17985 Can't recover from track or PCA error 17986 Can't recover from program memory area 17987 Can't recover from laed-in area 17988 Can't recover from lead-out area 17989 Can't recover from optical power 17990 EEPROM failure 18000 12V current failure 18001 Servo adjustment or syscon communication error 18002 Syscon not ready 18003 Command rejected 18004 Command not accepted 18031 Phase error 18205 Completed preview write 18206 Invalid B0 value 18207 PCA area is full 18208 EFM isn't detected 18209 ATIP detected with non CD-R disc 18210 Can't decide ATIP area or seek error 18211 No logical sector 18212 PMA area is full 18213 Read address is ATIP area (blank) 18214 Write address is EFM area (already written) 18215 Laser diode failure 18216 Out of focus 18217 Abnormal spinning (servo irq.) 18218 Buffer under run 18219 Write emergency occurred 18220 Read time-out 18221 Write time-out 18222 Not play ADPCM 18223 Abnormal spin 18224 Eject not available by command 18225 4th run-in block 18226 3th run-in block 18227 2nd run-in block 18228 1st run-in block 18229 Link block 18230 1st run-out block 18231 2nd run-out block 18238 Unable to ensure reliable writing at selected speed using the inserted disc 18239 Unable to ensure reliable writing at selected speed using the inserted disc 18240 Busy 18241 Communication error 18242 BCD check error 18243 Stack full 18244 Stack empty 18245 Version mismatch 18246 Copy proc. 18247 Remapped to SCSI2CD_RSCBF (loss of streaming) 18248 Illegal firmware version 18287 Abort 18424 Illegal cue sheet 18425 Inappropriate command 18456 Audio play operation not in progress 18457 Remapped to SCSI2CD_RSCBF (loss of streaming) 18480 Unrecordable disc 18481 Illegal track status 18482 Reserved track status 18484 Error reserving track 18485 Buffer error during recording 18487 Disc style mismatch 18490 Power calibration error 18491 Write error 18492 Not enough space writing lead-in/lead-out 18493 No track present to finalize 18495 Unable to recover damaged disc 18496 PMA area full 18497 PCA area full 18498 Recovery failed 18499 Recovery needed 18544 Error locking data storage elements range 18545 Reject area is full 18546 Would you like to continue? 18547 Would you like to retry last operation? 18548 Storage element %lu,%lu is empty or unaccessible 18549 Storage element %lu,%lu is full or unaccessible 18550 Storage element %lu,%lu contains a NG disc 18551 Reject storage element %lu,%lu contains a good disc 18552 End of range reached 18553 Invalid storage element address for data transfer element %lu 18554 Transport element path not clear 18555 Timeout waiting to allocate the medium transport element 18556 Source disc is blank 18557 Destination disc is not blank 18558 Destination disc is blank or unreadable 18559 Destination disc is not compatible 18560 Error printing CD label 18561 Printer not ready 18562 Error locking/unlocking robotics 18563 Error loading/unloading drive 18564 Error mounting/unmounting media 18565 Command %02lXh returned error %02lXh. Retrying... 18566 Last operation did not complete successfully. 18567 Padus DiscJuggler 18614 Logical unit not ready, initializing command required 18615 Logical unit not ready, manual intervention required 18630 Mechanical positioning error 18640 Invalid command operation code 18641 Element address is out of range 18642 Invalid element address 18644 Illegal field in CDB 18645 Logical unit not supported 18646 Illegal field in parameter list 18649 Import or export element access 18675 Message error 18679 SCSI parity error 18680 Medium destination element full 18681 Medium source element empty 18740 Logical unit waiting to becoming ready 18769 Illegal exchange operation 18795 Medium transport element full 18803 Disc mounted incorrectly 18806 No response from elevator motor FG 18807 No response from elevator sensor 18808 Driver or elevation motor locked 18809 Time over during elevation movement 18819 Medium release is impossible 18820 Door is opened 18821 Door open 18822 Disc mounted incorrectly 18823 Source storage element overlap 18824 Invalid source storage element address 18825 Time over during loading movement 18826 Disc transporter cannot sense a disc 18827 Medium removal prevented, I/F tray close required 18838 Drive #1 is not connected correctly 18839 Time over spinning up drive #1 18840 Time over spinning down drive #1 18841 Time over clamping drive #1 18854 Drive #2 is not connected correctly 18855 Time over spinning up drive #2 18856 Time over spinning down drive #2 18857 Time over clamping drive #2 18870 Drive #3 is not connected correctly 18871 Time over spinning up drive #3 18872 Time over spinning down drive #3 18873 Time over clamping drive #3 18886 Drive #4 is not connected correctly 18887 Time over spinning up drive #4 18888 Time over spinning down drive #4 18889 Time over clamping drive #4 18905 Time over during mail-slot movement 18913 Data in EEPROM is invalid 18914 Incorrectly mounted magazine 18915 Unable to open front door 18920 Disc transporter cannot grab a disc 18921 Mail-slot cannot sense a disc 18922 Disc slipped in the mail-slot 18928 Check settings (DIP switches and key lock) 18929 Invalid message error 18930 Power on, reset or bus device reset occurred 18931 Initiator detected error message received 18932 Non volatile information NG 19120 Operation in progress 19121 Operation interrupted (door open?) 19122 Timeout waiting for completion 19123 Communication parity error 19124 Error retrieving system status 19125 Command not acknowledged or unit busy 19152 (%s) %s 19392 Error while moving CD from tray to holder 19393 Error while moving CD from holder to tray 19394 Error while moving CD from tray to bulk 19395 Error while moving CD from bulk to tray 19396 Error at unknown place while moving CD 19397 CD dropped while moving CD 19408 Error while moving downward to pick up CD in the holder 19409 Error while moving downward to pick up CD in the tray 19410 Error while moving downward to drop CD into the tray 19411 Error while moving upward after picking up CD from tray 19412 Error at unknown place while moving upward 19413 CD chucking error from holder at retry operation (when SET command) 19414 CD lifting up error from holder at retry operation (when SET command) 19415 CD chucking error from tray at retry operation (when SAVE command) 19416 CD lifting up error from tray at retry operation (when SAVE command) 19417 CD chucking error from tray at retry operation (when REMOVE(1) command) 19418 CD lifting up error from tray at retry operation (when REMOVE(1) command) 19419 CD dropped while lifting up from holder (when SET command) 19420 CD dropped while lifting up from tray (when SAVE command) 19421 CD dropped while lifting up from tray (when REMOVE(1) command) 19424 Error while dropping CD down from arm 19440 Communication error 19441 Memory error 19511 Door open 19512 No CD on holder 19518 Holder is not set 19519 Bulk is not set 19633 Door open 19634 Holder is not set 19635 Bulk is not set 19636 No CD on holder 19637 Arm already has a CD 19638 No CD on arm 19639 Printer not ready 19640 Printer tray is out 19641 A CD is already on the printer tray 19642 No CD is on the printer tray 19643 Printer tray stoped forwarding 19644 Requested command is not executed because of printing 19648 Time-out 19649 CD dropped 19650 Unable to detect the rotator-tachometer 19651 Unable to detect the Z-tachometer 19652 Z-tachometer overflow 19653 Unable to drop CD 19655 Exclusive sensor error 19656 Bulk not set during axis initialization 19657 Holder not set during axis initialization 19658 Error lifting CD 19659 Life counter check-sum error 19660 Z-axis verical movement error 19661 Z-tachometer over-run 19662 Rotator-tachometer over-run 19663 Printer flag is ON 19664 Timeout(Rotator axis) 19665 Timeout(Printer tray) 19666 Z-tachometer under-run 19667 Timeout (Spin axis) 19668 Unnable to detect the spin-tachometer 19669 Printer tray is forwarding 19832 Abnormal TX buffer 19833 TX time-out 19834 Warning 19835 Parameter error 20017 SCSI controller: gross error 20018 SCSI controller: illegal command 20019 SCSI controller: unexpected interrupt 20020 SCSI controller: phase error 20021 Host abort or didn't respond to reselection 20022 SCSI command from other host in progress 20032 One or more magazine changed 20033 Door open 20034 Door closed without changing of a magazine 20035 Tray in magazine slot missing 20036 An element is blocked e/o not accessible 20037 Barcode read error 20038 Barcode value out of range 20039 Slot error 20040 Element not installed 20049 Robotic timeout 20050 Sensor failure 20051 Robotic initialization error 20052 Lift blocked 20053 Movement not supported 20054 No valid lift position available 20055 Robotic parameter error 20056 Mechanical error: operator required 20057 CD in picker 20058 No CD in picker 20059 No automatic cleanup/recovery after power up 20064 Drive drawer timeout 20065 Drive/tray status unknown 20066 Drive not accessible 20067 Drive not installed 20080 Mailbox in use by operator 20081 No mailbox installed 20082 Mailbox mechanical error 20083 Mailbox timeout 20084 Mailbox status unknown 20085 Mailbox drawer open 20086 Mailbox paramenter error 20096 NVRAM timeout 20097 NVRAM paramenter error 20098 Parameter pointer exceeds limit 20128 Running in bootstrap mode: command not available 20129 Illegal transfer lenght 20130 Illegal flash segment number 20131 Flash erase error 20132 Flash programming error 20133 Unknown flash type 20143 Undetermined error 20144 Undetermined robotic error or flash segment access error 20177 Unknown error 20178 Loader jammed 20179 Input hopper empty 20180 Invalid command sequence 20181 Calibration/reset failed 20182 Output hopper full 20183 Unit busy (cover open?) 20184 Cover open 20368 Write complete 20369 Logical unit is reserved 20373 Audio address not valid 20376 Illegal cue-sheet 20377 Inappropriate command 20422 Media load mechanism failed 20425 Audio play operation aborted 20431 Loss of streaming 20432 Unrecordable disc 20433 Illegal track status 20434 Reserved track present 20435 Buffer data size error 20436 Reserve track command error 20437 Buffer error 20438 Invalid or unwritten area encountered 20439 Disc style mismatch 20440 No table of content 20441 Illegal block length for write command 20442 Power calibration error 20443 Write error 20444 Not enough space 20445 No track present to finalize 20446 Unrecovered track descriptor encountered 20447 Damaged track present 20448 Program memory area full 20449 Program count area full 20450 Not enough writable area to recover damaged track 20452 Exit from pseudo-write 20497 Unknown error 20498 Unit busy 20512 Loader jammed 20528 Input hopper empty 20560 A command was sent without clearing the user error 20576 Reject error: a drive is open 20592 Load error: all drives are closed 20608 Load error: no disc in the picker 20624 Calibration error 20640 Disc stucked in drive 20656 Output hopper full 20672 Unload error: the drive is empty 20688 Printer error 20689 Printer busy 20690 Printer tray out 20691 Printer tray in empty 20692 Printer tray in full 20704 Reject hopper full 20720 Off line 20736 Internal error 20753 Unknown error 20754 Input bin empty 20755 Printer error 20756 Positioning error 20757 Invalid command 20758 System configuration error 20759 Pick-up error 20784 OK 20785 Wrong parameter or communication failure 20786 Source location is empty 20787 Unable to identify source or destination 20788 Margin right reached 20789 Margin left reached 20790 Error moving carrier up 20791 Error moving carrier down 20792 Calibration error 20793 Disc Pick-up error 20794 Move error 20795 Timeout error 20796 Unload error 20797 Unable to identify index marks 20798 Initialization error 20799 Disc lost at unknown location 20800 Unable to identify current position 20801 Rotation error 20802 Reject bin full 20803 Drive error 20804 Printer error 20805 ? 20806 Error releasing disc 20807 Door open 20816 Image file not found 20817 Image not valid 20818 Label file not found 20819 Invalid hostname 20820 Communication error 20821 User not authorized or invalid password 20822 Maximum number of connections reached 20823 Invalid CD or DVD support selected 20824 Invalid number of copies selected 20825 Invalid write speed selected 20826 Invalid label size 20827 Invalid label 20828 CD or DVD media selected is not authorized 20829 Number of copies selected is not authorized 20830 Speed selected is not authorized 20831 Service suspended 20832 Service not running 20833 Number of clients exceeding the maximum allowed 20834 Network CD image error: %luX 20835 Client service not found 20890 Command '%c' returned an home sensor error (10) 20891 Command '%c' timed-out going to position 1 (11) 20892 Command '%c' timed-out going to position 2 (12) 20893 Command '%c' timed-out going to position 3 (13) 20894 Command '%c' returned a top sensor error (14) 20895 Command '%c' returned a float sensor erorr (15) 20896 Command '%c' returned a CD sensor error (16) 20897 Command '%c' returned an unknown error (17) 20898 Command '%c' timed-out the up encoder (18) 20899 Command '%c' timed-out the down encoder (19) 20900 Command '%c' returned an unknown error (20) 20901 Command '%c' returned an empty drive condition (21) 20902 Command '%c' returned an empty input bin condition (22) 20903 Command '%c' returned an empty printer condition (23) 20909 Command '%c' timed-out waiting for the printer to complete (29) 20910 Command '%c' returned invalid data (30) 20911 Command '%c' returned an undefined error (%d)